IBM 7383, Инструкция по установке и обслуживанию

Страница: 312 / 488

6.
Using your fingers, lift the DIMM out of the DIMM connector.
What to do next
If you are instructed to return the component or optional device, follow all
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Memory module installation
The following notes describe the types of DIMMs that the server supports and
other information that you must consider when you install DIMMs.
v
When you install or remove DIMMs, the server configuration information
changes. When you restart the server, the system displays a message that
indicates that the memory configuration has changed.
v
The server supports only industry-standard double-data-rate 3 (DDR3), 800,
1066, 1333, or 1600 MHz, PC3-6400, PC3-8500, PC3-10600, or PC3-12800
registered or unbuffered, synchronous dynamic random-access memory
(SDRAM) dual inline memory modules (DIMMs) with error correcting code
(ECC). See http://www.ibm.com/systems/info/x86servers/serverproven/
compat/us for a list of supported memory modules for the server.
– The specifications of a DDR3 DIMM are on a label on the DIMM, in the
following format.
– ggggg eRxff PC3 v - wwwwwm - aa - bb - ccd
where:
-
ggggg is the total capacity of the DIMM (for example, 1GB, 2GB, or 4GB)
- eR is the number of ranks
v
1R = single-rank
v 2R = dual-rank
v
4R = quad-rank
- xff is the device organization (bit width)
v
x4 = x4 organization (4 DQ lines per SDRAM)
v
x8 = x8 organization
v
x16 = x16 organization
294
System x3500 M4 Type 7383: Installation and Service Guide