IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 70 / 82

c. Disconnect the cables from the rear of the appliance.
d.
Pull the locking levers
1
forward, then with two people supporting the
front and the rear of the appliance
2
, lift the front of the appliance up
slightly
3
to clear the nailhead from the slot.
2. Lift the appliance off of the slide rails, as shown in Figure 21.
a. After the front nailheads clear the latches, lift up on the rear
1
of the
appliance to level the appliance
b.
Lift the server out of the rack
2
and place it on a sturdy surface.
c. Slide the rail back in the rack.
3. Remove the rear end of the slide rails, as shown in Figure 22 on page 53. Push
in the pins
1
and
2
push back on the rail
3
to disengage the slide rails
from the rear of the rack.
Lift point
Lift point
Figure 20. Unlatching and rotating the front of the appliance
Figure 21. Lifting the appliance off the slide rails
52
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide