IBM 7163, Руководство по диагностике и обслуживанию

Страница: 70 / 210

b. Lift and remove the battery from the socket.
6. Dispose of the battery as required by local ordinances or regulations (see
“Battery return program” on page 184 for information about disposing of the
battery).
Replacing the battery
The following notes describe information that you must consider when replacing the
battery in the server.
v
When replacing the battery, you must replace it with a lithium battery of the same
type from the same manufacturer.
v
To order replacement batteries, call 1-800-426-7378 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your IBM marketing representative or authorized reseller.
v After you replace the battery, you must reconfigure the server and reset the
system date and time.
v
To avoid possible danger, read and follow the following safety statement.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water
v
Heat to more than 100°C (212°F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the replacement battery, complete the following steps:
1. Follow any special handling and installation instructions that come with the
replacement battery.
2. Insert the new battery:
a. Position the battery so that the positive (+) symbol is facing away from you.
b. Use one finger to press the top of the battery clip away from the battery.
54
IBM System x3755 Type 8877 and 7163: Problem Determination and Service Guide