IBM 7163, Руководство по диагностике и обслуживанию

Страница: 188 / 210

BIOS-logged BMC system-event log messages
BIOS can log two types of system-event log messages: POST events, which occur
during system startup, and SMI events, which are generally run time errors detected
by hardware.
The server logs OEM-specific BIOS messages in the BMC system-event log. The
following table describes the four BIOS record types logged in the BMC
system-event log. You can obtain third-party software to provide BMC system-event
log translations for detailed byte definitions and repair actions.
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, System x3755 Type 8877 and 7163,” on page 25 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Sensor type Record type code Byte definition and description
OEM POST with time stamp 0xC0 Byte 11 POST Error/Event Type
0x00 POST PCI POST Event/Error
0x01 POST Processor Event/Error
0x02 POST Memory Event/Error
0x04 POST Bus Event/Error
0x05 POST Chipset Event/Error
OEM POST without time stamp 0xE0 Byte 4 POST Error/Event Type
0x00 POST PCI POST Event/Error
0x01 POST Processor Event
0x02 POST Memory Error
0x04 POST Bus Event
0x05 POST Chipset Event
OEM SMI handler with time stamp 0xC1 Byte 11 SMI Error/Event Type
0x00 SMI PCI Event/Error
0x01 SMI Processor Event/Error
0x02 SMI Memory Event/Error
0x04 SMI Bus Event/Error
0x05 SMI Chipset Event/Error
OEM SMI handler without time
stamp 0xE1 Byte 4 SMI Error/Event Type
0x00 SMI PCI Event/Error
0x01 SMI Processor Event/Error
0x02 SMI Memory Event/Error
0x04 SMI Bus Event/Error
0x05 SMI Chipset Event/Error
Solving SCSI problems
Note: This information also applies to Serial Attached SCSI (SAS) problems.
For any SCSI error message, one or more of the following devices might be
causing the problem:
v A failing SCSI device (adapter, drive, or controller)
v
An incorrect SCSI termination jumper setting
172
IBM System x3755 Type 8877 and 7163: Problem Determination and Service Guide