IBM 7133 D40, Руководство по обслуживанию

Страница: 297 / 306

Service Aids
All service aids for PC servers are provided by the Remote Systems Management
(RSM) configurator, which is supplied with the SSA adapter.
The RSM configurator is a Web Browser utility. It contains online help, and gives
access, locally and remotely, to the following subsystem functions:
v
Configuration functions that allow you to:
– Configure SSA disk drive modules to the using (host) system (see the user and
service information for your SSA adapter)
– Configure, create, and delete SSA RAID arrays (see the user and service
information for your SSA adapter)
v
Error log analysis (see the user and service information for your SSA adapter)
v
Service functions
The service functions that the RSM configurator provides for a selected adapter are:
v
Display a Logical View of the SSA network
v
Display a Physical View of the SSA network
v
View a selected 7133 Model D40 or Model T40 enclosure
v
Check all microcode levels
The Enclosure View provides the following enclosure functions:
v
Display:
– ID (name) of the enclosure
– FRUs that are installed
– VPD of each FRU
– Status of each FRU:
- Fault bit
- Exchange or Swap bit
- Connection type (for example, bypass cards)
– Ambient temperature
– Warning-temperature settings
– Physical position of each disk drive module
– Mode and state of each bypass card
v
Modify:
– ID (name) of the enclosure
– Warning-temperature settings
– Mode of each bypass card
Command Line Tools
Not applicable to PC servers.
Appendix B. Additional Information for PC Servers
279