IBM 6400-i05, Руководство по установке

Страница: 116 / 370

116
Chapter 4
Configuration Management Menu
Name Custom Sets
You may specify a 39-character name which can be used to refer to a custom
set. The name you enter for a custom set will be used in the Recall Custom
Set, Save Current Values, Delete Custom Set, Change Power On Set, Protect
Custom Sets, Print Custom Set Values, and Name Custom Sets menus. The
name can only be cleared by using the Reset Custom Set Names menu.
Press the MICRO UP or MICRO DOWN keys to cycle through the values
available for that character at the cursor location. Press the SCROLL UP key
to move to the next character to be modified. Press the SCROLL DOWN key
to go back to a character you have already modified. Continue until you have
entered the name you want to give to this custom set, then press ENTER to
save. The name you entered will now represent this custom set on the
printer's front panel. To exit this menu without saving, press any key other
than the ENTER key. The custom set name will revert to the last saved value.
Reset Custom Set Names
You can reset specific custom set names back to the default value of the
configuration number.