IBM 6400-i05, Руководство по установке

Страница: 103 / 370

103
4
The Configuration Menus
Configuration Overview
This chapter describes the configuration menus. The Configuration Main
Menu options and all of the submenu options are illustrated in menu diagrams
and described in detail. For procedures showing how to enter Program mode,
save, recall, and print configurations, refer to Chapter 3, “Configuring the
Printer” on page 79.
Figure 66 shows an overview of the configuration menus.
The menus that are displayed from the operator panel are determined
by the installed features. For example, if you ordered the IPDS
feature, then the IPDS menu would appear on the operator panel. If
the IPDS feature is not installed, then the IPDS menu will not appear
on the operator panel.
Each feature is shipped with a document that describes the feature in
detail. For more information about these documents, see “Related
Documents” on page 15.
The configuration menu diagram on page 104 shows the structure of the
configuration menus and the parameter options available in each menu. The
diagrams list the menus and options in the order they appear when you use
the operator panel to configure the printer. Factory default configuration
values are indicated by an asterisk (
*
).
Pressing the operator panel keys (Enter, Return, Scroll
↑
, and Scroll
↓
)
allows you to move through the menus and select various choices for the
options, as follows:
•
The Enter key allows you to move down to a lower level in the menu
structure, and to select an option value as the active value.
•
The Return key moves you back up the menu structure.
•
The Scroll
↑
key moves forward through the options at a particular menu
level.
•
The Scroll
↓
key moves backward through the options at a particular
menu level.
These keys are summarized in a legend box at the lower right corner of each
configuration menu diagram.