IBM 6400-D Generation II Series страница 160 Скачать руководство пользователя | Manualshive

Страница: 160 / 184

background image

160

Notices

IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquires, in writing, to:

IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785 U.S.A.

The following paragraph does not apply to the United Kingdom or any
other country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES
THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.

This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will
be incorporated in new editions of the publication. IBM may make
improvements and/or changes in the product(s) described in this publication
at any time without notice.

Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of
those Web sites. The materials at those Web sites are not part of the
materials for this IBM product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.

Any performance data contained herein was determined in a controlled
environment. Therefore, the results obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these
measurements will be the same on generally available systems. Furthermore,
some measurement may have been estimated through extrapolation. Actual
results may vary. Users of this document should verify the applicable data for
their specific environment.

Information concerning non-IBM products was obtained from the suppliers of
those products, their published announcements or other publicly available
sources. IBM has not tested those products and cannot confirm the accuracy
of performance, compatibility or any other claims related to non-IBM products.
Questions on the capabilities of non-IBM products should be addressed to the
suppliers of those products.

«
...
158
159
160
161
162
...
»

Содержание 6400-D Generation II Series

























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 6400-D Generation II Series

Бренд: NCR Страницы: 10

Бренд: Datamax Страницы: 2

Бренд: Pantum Страницы: 105

Бренд: Tektronix Страницы: 286

AirLive WP-203G

Бренд: Ovislink Страницы: 132

Бренд: Konica Minolta Страницы: 8

Бренд: Savin Страницы: 132

Бренд: Canon Страницы: 48

Pixma PRO-100S series

Бренд: Canon Страницы: 4

Pixma PRO-100S series

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 570

Бренд: Canon Страницы: 571

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 342

Бренд: Canon Страницы: 454

Бренд: Canon Страницы: 498

Бренд: Canon Страницы: 563

Бренд: Canon Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды