IBM 6.1.8.2 Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 114

IBM 6.1.8.2 Скачать руководство пользователя страница 91

Chapter 5. Monitoring the system using LEDs

The IBM Storage Scale System Utility Node offers LED-based monitoring, which customers can use for

monitoring and maintenance of their system.
The following components of utility node support LED-based monitoring:
• System status
• Power supply unit (PSU)
• Ethernet port

System status LED

System status LEDs provide status of the utility node.
Six status LEDs are available on the front of the enclosure, distributed as shown in the following figure.

Figure 49. System status LEDs on the front panel of the utility node

Table 21. Identification of the system status LEDs of the utility node

1 LAN 1
2 LAN 2
3 ID
4 Warning
5 M.2 SSD
6 Power button

Table 22. Behavior of system status LED of the utility node
LED type

Color

Behavior

Power

Green

Off

The system is powered

off.

Solid on

The system is powered

on.

Blinking

The system is under S1

or S3.

©

Copyright IBM Corp. 2022, 2023

71

«
...
89
90
91
92
93
...
»

Содержание 6.1.8.2



















































































































Отзывы:

Нет отзывов