manualshive.com logo in svg

IBM 6.1.8.2, Руководство по планированию и установке оборудования, Страница: 65 / 114

Поделиться
Скачать
IBM 6.1.8.2 Скачать руководство пользователя страница 65

CAUTION:

The weight of this part or unit is 18 - 32 kg (39.7 - 70.5 lb). It takes two persons to safely lift this

part or unit. (C009)
CAUTION: Use safe practices when lifting. (R007)

The following table shows the rack space requirements for the utility node in tabular form.

Table 15. Rack space requirements for the utility node

Minimum rail length

Maximum rail depth (including cable management

arm)

660 mm (26 in.)

940 mm (37 in.)

Service Envelope Illustration

The following figure provides a close-up view of the utility node mounting envelope.

Figure 16. Service envelope illustration (Dimensions in millimeters)

Service clearance for the utility node

The service clearance area is the area around the rack, which is needed for the authorized service

representatives to service the enclosure as shown in the sample illustration in the following figure.

Chapter 3. Planning for hardware  45

Содержание 6.1.8.2



















































































































Отзывы:

Нет отзывов