IBM 5710, Инструкция по установке и использованию, Страница: 22 / 52

5. Turn on any external devices.
6. If you have turned off your display, turn it back on and follow any instructions on the screen.
Connecting Internal Devices
Note: All the connectors are built so that they can only be plugged in correctly one way.
To connect internal devices, do the following:
1. Attach a 16-bit cable to the correct internal system drive or backplane.
2. Connect the adapter end of the cable to the correct internal connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter. Use either connector Channel 0 (J2) or Channel 1 (J3).
3. When completed, refer to your system unit installation guide to install the covers and to power on the
system unit, as well as all other attached devices.
Note: For more information about connecting internal devices, refer to the documentation provided with
your system unit.
10
PCI-X Dual Channel Ultra320 SCSI Adapter Installation and Using Guide