IBM 4247 Model 003, Руководство пользователя

Страница: 95 / 392

Media Size Priority
This parameter is available only if the IPDS feature is installed, and the IPDS data
stream is selected. It affects the use of the XOH Set Media Size (SMS) order. This
order may be used in the IPDS data stream to set the page size. The Media Size
Priority setting specifies whether XOH-SMS orders take precedence over the
operator panel settings for maximum print position (MPP) and maximum page
length (MPL).
The following values will be displayed in the menu:
Standard
The smaller page size values have priority. The page size will be the
intersection (smaller values) of the operator panel settings and the
XOH-SMS X and Y values.
Alternate (default)
The XOH-SMS order values have priority. If an XOH-SMS order is present,
its values will be used to define the page size instead of the operator panel
settings.
The media size is defined by the MPP and MPL parameters.
To change or check the Media Size Priority, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Media Size Priority
5.
Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for media size priority is
displayed.
7.
Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Bar Code Mode
This parameter is valid only if the IPDS feature is installed and the IPDS data
stream is selected. Changing the value of this parameter can affect throughput in
some printing environments.
You can set the Bar Code Mode to any of the following values:
High (Default)
High Contrast Bar Codes
Low Low Contrast Bar Codes
Chapter 7. Twinaxial Configuration
85