IBM 4247 Model 003, Руководство пользователя

Страница: 81 / 392

v
Bin 3
v
Manual
v
Last Used
Selecting Last Used causes the Paper Source parameter (in the Printer Setup menu)
to be updated whenever the data stream selects a paper source. If the data stream
attempts to select the operator panel setting for power-on paper source, the most
recently selected paper source will be used instead.
To change or check the power-on paper source, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Configuration Storage
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Configuration Storage
Power-On Paper Source
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired Power-on Paper Source value is
displayed.
7.
Press Enter.
An asterisk (*) will be displayed in front of the selected paper source.
8. Use Start or Return to exit the Menu. See “Exiting the Configuration Menu” on
page 55.
Recall Factory Defaults
This function sets all parameter values to the original manufacturing default
values, except Vital Product Data and Printer Address (twinax attachment). These
settings can only be changed through their own menu selection.
The printer is shipped with all of the custom sets set to manufacturing default
values and custom set A as the power-on custom set. The Recall Factory Defaults
function does not affect the values saved in custom sets.
Note: When factory defaults are recalled, a partial reset is automatically performed
when exiting from the configuration menu if the value of at least one of the
parameters that requires a partial reset has been changed. Buffered data will
be lost.
To recall the factory defaults, follow these steps:
1.
Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Configuration Storage
3. Press Enter.
Chapter 4. Configuration Storage
71