IBM 4247 Model 003, Руководство пользователя

Страница: 61 / 392

Cancel Print
Cancel
Print
When this key is pressed while the printer is active and online, the attachment
sends a “cancel request” to the host and, for coax and twinax attachment, all print
data is cleared, the print buffers are cleared, and the printer displays:
059 CANCEL PRINT SELECTED
For twinax, the “cancel print” function is valid in the online not ready and ready
states.
For coax, the “cancel print” function is only valid in the online not ready state
when the Format/Online indicator is on. The cancel request is not sent, however,
until you press Start after the 059 message is displayed. If you press Cancel Print
again after the 059 message is displayed (instead of Start), the cancel request will
not be sent and the 059 message will be cleared.
For parallel, serial, and LAN, the Cancel Print clears all print buffers. This
function is valid only when the printer is not ready.
Cancel Print is also active in Operator Print Tests. If Cancel Print is pressed while
in the tests, the printer stops any test in process, exits the test mode, performs a
partial reset, and becomes ready.
Test
Test
Press Test to enter the Operator Print Tests menu. The Test function is valid only
when the printer is not ready.
There are several tests available. After you press Test, the printer displays:
4247 OPERATOR PRINT TESTS
Quick Reference
Press Scroll
↑
or Scroll
↓
to display the other available tests.
Refer to Chapter 18, “Using the Operator Print Tests” on page 273 on selecting and
running tests.
Chapter 2. Understanding the Operator Panel
51