IBM 4247 Model 003, Руководство пользователя

Страница: 60 / 392

while you hold down the Set Top of Form key.
If preprinted forms are being used, use Paper Load Positioning (see Chapter 11,
“Printer Adjustments” on page 159) instead of Top-of-Form.
Note: For ASF and Manual Sheet Feed, adjustment to the top margin must be set
through the Paper Load Position. See Chapter 11, “Printer Adjustments” on
page 159 for more information.
Start
S ta rt
Press Start to perform the following functions:
v
Make the printer ready and cause the Ready message to appear in the operator
panel display.
v
Exit the Configuration Menu and make the printer ready. If a partial reset is
required, it is performed to put configuration changes into effect before the
printer becomes ready.
Note: If you have made configuration changes and have not saved them in a
Custom Set, the display will prompt you to save the changes.
v
Start the printer printing if no error condition appears on the display and if the
computer is sending data to be printed.
v
Begin a test from the Operator Print Tests menu.
Stop
S t o p
If the printer is in a ready state, press Stop to:
v
Make the printer not ready and cause the Ready message to disappear from the
operator panel display
v
Stop printing as soon as possible without losing print data
v
Stop a test if the printer is in test mode
v
Stop the printer alarm from beeping
v
Allow you to use the other printer function keys
v
Cause the printer to display:
NOT READY <x>
(or cause the current test menu to display if the printer is in Operator Print Tests
mode)
If an error condition appears on the operator panel display, pressStop to:
v
Clear the error message from the display
v
Stop the printer alarm from beeping.
50
4247 Model 003 User’s Guide