IBM 4002-C4A, Инструкция по установке и эксплуатации

Страница: 57 / 94

undelete Recover deleted file
whois WHOIS lookup
write Write running configuration to flash or terminal
To display lines containing only a specified search string (similar to the
include
option for
show
commands) press the plus sign key ( + ) at the
—More—
prompt and
then enter the search string.
--More--, next page: Space, next line: Return key, quit: Control-c
+telnet
The filtered results are displayed:
filtering...
telnet
Telnet by name or IP address
To display lines that do not contain a specified search string (similar to the exclude
option for show commands) press the minus sign key ( - ) at the —More— prompt and
then enter the search string.
--More--, next page: Space, next line: Return key, quit: Control-c
-telnet
The filtered results are displayed:
filtering...
sync-standby
Sync active flash (pri/sec/mon/startup config/lp images)
to standby if different
terminal
Change terminal settings
traceroute TraceRoute to IP node
undelete Recover deleted file
whois WHOIS lookup
write Write running configuration to flash or terminal
As with the commands for filtering output from show commands, the search string is
a regular expression consisting of a single character or string of characters. You
can use special characters to construct complex regular expressions. See the next
section for information on special characters used with regular expressions.
Using special characters in regular expressions
You use a regular expression to specify a single character or multiple characters as
a search string. In addition, you can include special characters that influence the
way the software matches the output against the search string. These special
characters are listed in the following table.
Table 8. Special characters for regular expressions
Character Operation
. The period matches on any single character, including a blank space.
For example, the following regular expression matches “aaz”, “abz”, “acz”,
and so on, but not just “az”:
a.z
* The asterisk matches on zero or more sequential instances of a pattern.
For example, the following regular expression matches output that contains
the string “abc”, followed by zero or more Xs:
abcX*
Chapter 5. Getting familiar with c-series Command Line Interface (CLI)
33