IBM 3409-A00, Руководство по эксплуатации прибора, Страница: 36 / 56

Intelligent Platform Management Interface (IPMI)
This network port allows remote administration of hardware. For a detailed description of IPMI, refer to
the following Intel documentation.
http://www.intel.com/content/www/us/en/servers/ipmi/ipmi-home.html
Power supplies
Each power supply includes one LED with five states in the rear.
Table 7. Power supply LED states
LED state
Description
Off No AC power to either power supply.
Amber Power
®
supply critical event that is causing a shutdown
(failure, Overcurrent Protection, Overvoltage Protection, fan
failure, AC out of range, or no AC power to this PSU (only for 1
+ 1 configuration)).
Flashing Amber Power supply warning event where the power supply
continues to operate (high temp, high power, high current, or
slow fan).
Flashing Green AC present/only 5 standby voltage (PSU off).
Steady Green Output on and OK.
Hard disk drive carrier
Each drive carrier has two LEDs, one to indicate activity (green) and the other to indicate status (blue/
amber).
Table 8. Conditions indicated by drive carrier LEDs
Condition
Activity LED (Green) Status LED (Blue) Status LED (Amber)
Drive not installed. Off Off Off
Drive is installed. Solid on Off Off
Drive is selected/
identified.
Off Normal flashing Off
Drive is active. Fast flashing Off Off
Drive failed. Off Off Solid on
Drive is rebuilding. Slow flashing. Off Normal flashing
Ports
The following ports are on this model of Accesser
®
.
Table 9. Descriptions for the ports represented by this appliance
Port
Description
VGA (DB-15) The DB-15 video connector can connect a monitor to this port by using a VGA
cable. The maximum video resolution is 1600 x 1200 at 75 Hz.
USB 2.0 The USB ports can connect a USB keyboard or the supplied USB memory key to
any of these connectors.
18 IBM Cloud Object Storage System: Accesser 3105 Appliance Manual