IBM 2-Gigabit Fibre Channel PCI, Инструкция по установке и использованию

Страница: 37 / 52

Chapter 6. Gigabit Fibre Channel PCI Adapter Interface
The Gigabit Fibre Channel PCI Adapter (Type 4-S) and the 2-Gigabit Fibre Channel PCI
Adapter (Type 4-W) connect host systems to a storage subsystem through a fibre
channel interface.
Adapter LEDs
The adapters have two LEDs: green and yellow located near the connectors. These
LEDs can be used to determine the state of the adapter.
Green LED Yellow LED State
OFF OFF Wake up failure (dead board)
OFF ON POST failure (dead board)
OFF slow blink (1HZ) wake up failure
OFF fast blink (4HZ) Failure in POST
OFF flashing (irregularly) POST processing in progress
ON OFF failure while functioning
ON ON failure while functioning
ON slow blink (1HZ) Normal - inactive
ON flashing (irregularly) normal - active
ON fast blink (4HZ) normal - busy
slow blink OFF normal - link down or not yet
started
slow blink slow blink (1HZ) off-line for download
slow blink fast blink (4HZ) restricted off-line mode (waiting
for restart)
Product Descriptions
The Fibre Channel-PCI Host Adapters (PCIHA) are configured for fibre media by the
installed Gigabit Link Module (GLM).
Product Summaries
Gigabit Fibre Channel PCI Adapter (Type 4-S)
Host Interface
PCI 32-bit, 5V or 3.3V signaling
Fiber Channel Interfaces
FC-PH compliant, optical short wave, multimode: Non-OFC, 1062.5Mb/s-SC
connectors
27