Adapter FRU number
000E9284 (Designed to comply with RoHS requirement)
Wrap plug FRU number
12R9314 (for Fibre LC connector)
10N7405 (for RJ45 connector)
I/O bus architecture
PCIe3 x8
Slot requirement
For more information about slot priorities, maximums, and placement rules, see PCIe adapter
placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/
p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on.
Voltage
3.3 V, 12 V
Form factor
Short, regular sized bracket, low-profile capable
Cables
SR SFP+ optical fiber cables and Cat5 Ethernet cables
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. To check for operating system and partition requirements, see one of the following links:
v
The latest version of enabling libraries and utilities can be downloaded from Fix Central
(http://www.ibm.com/support/fixcentral/).
v
IBM Power Systems Prerequisites (https://www14.software.ibm.com/support/customercare/iprt/
home).
v
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
v
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be
downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/
webapp/set2/sas/f/lopdiags/home.html).
v
For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/
webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe3 RAID SAS quad-port 6 Gb LP Adapter (FC EL3B; CCIN 57B4)
Learn about the specifications and operating system requirements for the feature code (FC) EL3B adapter.
Overview
The PCIe3 RAID SAS quad-port 6 Gb LP Adapter is a PCI Express (PCIe), generation 3, RAID SAS
adapter that has a low-profile and short-form factor. The adapter is used in high-performance and
high-density, serial attached SCSI (SAS) applications. It supports the attachment of SAS disk and SAS
tape by using four mini SAS high-density (HD) x4 connectors that allow the physical links to be used in
various narrow and wide-port configurations. SAS tape attachment is only supported in a single adapter
configuration and cannot be mixed with SAS disk on the same adapter. The adapter does not have write
cache. Figure 49 on page 110 shows the PCIe3 RAID SAS quad-port 6 Gb LP Adapter.
The adapter is a 64 bit, 3.3 V, bootable SAS adapter that provides RAID 0, 5, 6, and 10 capability, and
system level mirroring via the operating system. The adapter provides both single and dual RAID
controller configurations. Dual controller configurations (dual storage IOA) must run RAID. JBOD (512
byte) functionality is supported only in a single controller configuration based on the operating system.
Managing PCIe adapters
109
Содержание 000E9283
