ibidi Gas Incubation System – Silver Line
1.7
Limited Warranty
Products manufactured by ibidi, unless otherwise specified, are warrantied for a period of one year
from the date of shipment to be free of defects in materials and workmanship. If any defects in the
product are found during this warranty period, ibidi will repair or replace the defective part(s) or
product free of charge.
This warranty does not apply to defects resulting from the following:
1. Improper or inadequate installation.
2. Improper or inadequate operation, maintenance, adjustment, or calibration.
3. Unauthorized modification or misuse.
4. Use of unauthorized tubing or fluidic connectors.
5. Use of consumables, disposables, and parts not supplied by an authorized ibidi distributor.
6. Corrosion due to the use of improper solvents, samples, or due to surrounding gases.
7. Accidents beyond ibidi’s control, including natural disasters.
This warranty does not cover consumables, such as cell culture chambers and dishes, tubes, fluidic
connectors, reagents etc.
The warranty for all parts supplied and repairs provided under this warranty expires on the warranty
expiration date of the original product.
1.8
Transporting the ibidi Gas Incubation System – Silver Line
The weight of the Gas Mixer and the Humidifying Column is given in the specifications (Section
Moving the devices during operation will pose a risk of personal injury or damage to the instrument.
For transport, switch off the Gas Mixer, close all gas input lines and then disconnect all cables and
tubing from the controller and peripheral components. Leave the instrument to cool down for ap-
proximately five minutes. Carry the devices carefully and avoid mechanical shocks.
WARNING
– Close all gas input lines before disconnecting the gas tubing from the Gas
Mixer!
Version 1.0 (June 1, 2022)
12
Instruction Manual
