Gas Incubation System
For most applications, we recommend using the values given in Table
. The full specification range
is indicated in the specifications (Section
Caution!
Be aware that when the system is switched on, some parts of the tubing are actively heated:
The Humidifying Column base (max. 55°C/131°F), the water in the Humidifying Column (max.
60°C/140°F) and the Heated Tubing Package (max. 40°C/104°F outside).
5.4
Setting Parameters in the Front Display
All control parameters can be manually set on the controller using the buttons and the display on the
front panel.
Figure 15 – Gas Mixer front display and set buttons.
The display shows the measured (’I’ = instantaneous) and set (’S’ = set) temperatures of all the chan-
nels.
The cursor position is indicated with square brackets (”
[
]
”). You can move the cursor using the
”left” and ”right” buttons. If you want to select a parameter or a function, press the round button
and the square brackets will change to angle brackets (”
<
>
”). Now you are able to change the
value with the ”up” and ”down” buttons. To confirm the changed value, you must press the round
button once more.
5.4.1
Run/Stop Mode
Set the whole system to run or stop mode by manipulating the setting in the display’s bottom line to
”Run” (= system is running) or ”Stop” (= system is not running).
Figure 16 – Main display indicating ”Run”
Instruction Manual
27
Version 2.2 (May 15, 2019)
