ibico Patriot 62C, Руководство оператора

Страница: 8 / 37

Page 6 © 2002 IBICO
Patriot 62C Operations Manual
E. Feed Table: Fig (3). The feed table has a safety interlock switch. When the table is
removed, power to the motors is also removed.
F. Front Rollers: Fig (3). Prints are fed into the roller so that pressure sensitive materials
may be applied to prints.
G. Idler Bar: Fig (3). The idler bar located near the supply roll is used to direct the film to
the rollers and helps to release the liner from pressure sensitive films.
H. Film Shafts and Core Adapters: Fig (3). The core adapters are inserted into the ends
of the film cores. The film shaft is inserted through the centers of the core adapters then
placed on the laminator. Four 3” and four 2 ¼” cores are included with the Patriot 62C.
I. Rewind Unit: Fig (3). Located on the top of the unit, the rewind is designed to take up
the release liner as the print is being laminated.
Figure 3
I
H
F
E
G