NOTICE
Any unused antenna ports must be properly terminated with 50 Ohm,
otherwise the product might be damaged when power is applied to a
non-terminated antenna port.
NOTE
To ensure specified IP protection, suitable QMA connectors/cables and
terminations must be used.
3.5. LED Indicators
DC
OPR
ERR
X1
X2
Figure 5. LED indicators
LED
Description
DC
Power status
OPR
Operation status
ERR
Error status
X1
Ethernet status for X1 port
X2
Ethernet status for X2 port
Table 9. LED indicators
NOTE
Refer to management guide for detailed LED status indication.
3.6. Dimensions
Dimensions are stated in mm and are regardless of variants.
18
Ibex-RT-330-5G Series
