3.4.3. Ethernet Ports
Marking
Position
Direction
Description
X1/X2
1
In/Out
DA+
2
In/Out
DA-
3
In/Out
DB+
4
In/Out
DB-
5
In/Out
DD+
6
In/Out
DD-
7
In/Out
DC-
8
In/Out
DC+
Housing
Shield
Chassis of product (ground)
Table 7. M12 X-coded 8-pin female Ethernet connector according to IEC 61076-2-109
Position
Device mode A
Device mode B
1
+DC
2
+DC
3
-DC
4
-DC
5
-DC
6
-DC
7
+DC
8
+DC
Table 8. Ethernet PoE connection on X2
NOTE
If the Ethernet function is not used, the protective dust cap which is part
of the delivery must be closed to protect the interface from water or dust
ingress.
3.4.4. Antenna Ports
The antenna connectors are identified on the product with .
A1 to A4 are used for 5G communication. It is recommended to use all 4 antenna ports.
A5 is used for the included GNSS receiver. The antenna port must be connected to an
external GNSS antenna.
Ibex-RT-330-5G Series
17
