3.4. Connector Information
3.4.1. Power Input Connection
Marking
Position
Direction
Description
DC
1
+DC
Positive terminal
2
-
3
-DC
Negative terminal
4
-
Housing
Shield
Chassis of product
(ground)
Table 6. M12 A-coded 4-pin male power connector according to IEC 61076-2-101
NOTE
If the product is powered by PoE, the protective dust cap which is part of
the delivery must be closed to protect the power interface from water or
dust ingress.
3.4.2. SIM Card Slot
X1
X2
DC
SIM
Power
PoE
Ethernet
SIM
Figure 4. SIM card slot
To remove the SIM card drawer, untighten the two knurled screws until they are loose and
not anymore connected to the unit frame. Carefully move the drawer out of the frame.
Place the SIM cards into the sockets in slot 1 and/or slot 2 with the contacts facing down.
Let chamfered corners align according markings on the drawer.
Ibex-RT-330-5G Series
15
