IBASE Technology MI945PA, Руководство пользователя

Страница: 42 / 67

BIOS SETUP
38 MI945PA User’s Manual
Security Settings
This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and
Setup utility. User Password sets a password that will be used
exclusively on the system. To specify a password, highlight the type you
want and press <Enter>. The Enter Password: message prompts on the
screen. Type the password and press <Enter>. The system confirms your
password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are
prompted to enter the password. A message will confirm the password to
be disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot
Security
Chipset Exit
Security Settings
Install or Change the
Password.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
[Disabled]