IBASE Technology MB950, Руководство пользователя, Страница: 37 / 64

BIOS SETUP
MB950 User’s Manual 33
BIOS SETUP UTILITY
Main
Advanced
PCIPnP Boot Security Chipset Exit
PCI Express Configuration
Active State Power Management [Disabled]
Enable/Disable
PCI Express L0s and
L1 link power states
<- Select Screen
↑ ↓ ↑ ↓ ↑ ↓ ↑ ↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Main
Advanced
PCIPnP Boot Security Chipset Exit
Configure Remote Access type and parameters
Remote Access Enabled
Serial port number [COM1]
Serial Port Mode [1115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST Always
Terminal Type ANSI
VT-UTF8 Combo Key Support Enabled
Sredir Memory Display Delay No Delay
Select Remote Access
type.
<- Select Screen
↑ ↓ ↑ ↓ ↑ ↓ ↑ ↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
When enabled, the Remote Acces type and parameters are shown:
Serial port number -
Select Serial Port for console redirection.
Serial port mode -
Select Serial Port settings.
Flow Control -
Select Flow Control for console redirection.
Redirection After BIOS POST
Disable : Turns off the redirection after POST.
Boot Loader : Redirection is active during POST and during Boot Loader.
Always : Redirection is always active. (Some OSs may not work if set to
Always.)
Terminal Type -
Select the target terminal type.
VT-UTF8 Combo Key Support –
Enable VT-UTF8 Combination Key
Support for ANSI/VT100 terminals.
Sredir Memory Display Delay –
Gives the delay in seconds to display
memory information.