LAN DRIVERS INSTALLATION
54
IB730 User’s Manual
Installing the Drivers for Windows NT 4.0
Once you are in the Windows NT 4.0 environment, follow the procedures
below to install the VGA drivers that come with your board.
1. Click the
Start
button, then go to
Settings
and click on
Control
Panel
.
2. Click on the
Display
icon to start the
Display Properties
window.
3. Click on the
Settings
tab, and then click on
Display Type
.
4. In the
Change Display Type
window, click on
Change Adapter
Type
. This will bring up the
Select Device
window.
5. In the
Change Display
window, click on
Have Disk
. Enter the
directory where the Windows NT driver files are located as
d:\vga\ct69000\winnt40
(assuming D: is the CD-ROM drive.)
Then select
OK
, or press
ENTER
.
6. Select
Chips Video Accelerator
from the display list provided, then
click
OK
or press
ENTER
.
7. You will then see a warning panel about Third Party Drivers. Click
on
Yes
to finish the installation.
8. Once the installation is complete, the system must be shut down and
restarted for the new drivers to take effect.
9. When the system has restarted, the default graphics mode (usually
640x480x256color) has been automatically selected. Click the
Start
button, and then go to
Settings
and click on
Control Panel
. Click on
the
Display
icon to start the
Display Properties
window. Click on
the
Settings
tab. A new screen setting can be selected using either of
the following methods:
A.
Use the slide-bar in the Desktop Area to select new setting.
B.
Click on
List All Modes
. From the list provided, select a
new setting, then click
OK
or press
ENTER
.
C.
Click on
Test
to test the newly selected graphics mode.
Follow the instructions given on screen. A test screen
should appear, followed by the
Testing Mode
window.
Click on
Yes
to continue. Click on
Apply
to switch to the
new graphics mode. Graphics modes are changed
dynamically on NT 4.0, so you do not need to shut down and
restart for the new screen settings to work.