iB-WPA300N
300M MIMO Wireless-N PCI-E Adapter
10
Chapter 3 Connect to a Wireless Network
With both the hardware and software successfully installed into your computer, you can
quickly connect to a wireless network using one of the following methods.
¾
Method-I: To connect using Wireless Utility
iB-WPA300N uses the iB-WPA300N Wireless Utility as the management software. The
utility provides you an easy interface to connect to a network and to change any settings
related to the wireless adapter.
¾
Method-II: To connect using WPS
By this method, you can connect to your network quickly on the condition that your Router
or access point supports.
¾
Method-III: To connect using Windows built-in wireless utility
Windows users may use the built-in wireless utility to connect to a wireless network. For
specific operations, please go to
Section 3.3 To connect using Windows built-in wireless
3.1
To connect using iB-WPA300N Wireless Utility
1. After installation, the utility configuration page will automatically pop up on the screen.
If the utility page does not pop up, you can also launch the utility by double-clicking on
the
icon on your desktop or the icon
in your system tray.
Figure 3-1
2. The
Network
page will display all wireless networks that are available in your area. To
connect to a network, simply highlight the wireless network name (SSID) and click
Connect
. If you tick
Connect automatically
, the adapter will automatically connect to
your target network next time.
