Manual
ibaDAQ-C
18
Issue 1.4
7.3
Operating elements
7.3.1
ON/OFF switch S11
By switching the device off and on again, the supply voltage is disconnected and re-
connected and the device is rebooted. There are different ways to shut down or switch
off the running device:
Press briefly: system shuts down
Press and hold (> 5 s): system switches off (no controlled shut-down)
7.3.2
Rotary switch S1
The S1 rotary switch is used to specify IP address settings:
Position
Description
0
User-defined IP addresses are used for the interfaces X21 and X22. The
IP addresses can be configured in ibaPDA or in the system settings.
1
DHCP active for X21 and X22 (factory setting)
2
fixed IP addresses
X21: 192.168.1.1
X22: 192.168.1.2
3…F
Not allowed
It is also possible to select different address assignment methods for the two interfaces
X21 and X22. Example:
X21 = Interface for the IT network, DHCP is active
X22 = Interface for the process network with fixed IP address 192.168.121.2
Procedure:
1.
First, set switch
S1
to position
1
and establish a connection between the ibaPDA
client and ibaDAQ-C. To do so, start the ibaPDA client on your PC and follow the
steps in chapter 9.1.
2.
Set switch
S1
to position
0.
3.
Open the I/O Manager in ibaPDA, select the node ibaDAQ-C and switch to the "Info”
tab.
