IBA ibaClock, Руководство пользователя

Страница: 24 / 57

Manual ibaClock
24 Issue 1.4
9.3 Web interface
9.3.1 Open the web interface
1. Start your web browser if your computer is connected to ibaClock via a bidirectional
FO connection, Ethernet or USB.
2. Enter the internet address (URL) of the device into the address line.
If connection via... Then URL...
FO bidirectional IP address, that appears in the I/O Manager of ibaPDA
in the “General” tab in the field “IP address” if the device
has been configured or automatically detected, in the
example below
http://172.29.0.101 .*
The resolution of the device name is not supported.
Ethernet TCP/IP interface IP address of the device, e.g. http://192.168.1.1
or device name
http://ibaclock_xxxxxx
USB interfaces IP address of the device: http://192.168.0.1 .
The resolution of the device name is not supported.
*IP address in Flex mode
IP address in Flex mode
The automatically assigned IP address in Flex mode consists of 4 sections, e.g.
172.29.0.101.
The first two sections (172.29) correspond to the IP address of the ibaFOB-D network
adapter, the third section (0) corresponds to the number displayed in the ibaFOB-D card
in the computer *10 + link number, to which the device is connected, the fourth section
(101) is the device a 100.
Tip
If you use the Internet Explorer as browser, it might be necessary, depending on the
security level of the Internet Explorer, to enter the address http://ibaclock_xxxxxx or,
depending on the access path, the IP based URL into the trusted pages.
The pages Network, Settings and Administration are only accessible by the administra-
tors and are password protected.