Manual
ibaBM-DPM-S-64
66
Issue 2.5
13.2.2
Profibus Module
Profibus-DP
2 x 9-pin. D-Sub socket
Terminating switch S4: Terminator network for Bus0
S5: Terminator network for Bus1
LEDs
Status
Bus0
Run (green); Bus (yellow), Active (white), Error
(red)
Bus1
Run (green); Bus (yellow), Active (white), Error
(red)
13.3
Data Transmission
13.3.1
Main Circuit Board
Data transfer rate
(ibaNet fiber optic cable)
3.3 Mbit/s
Logging rate
1 ms
Data volume
64 analog s 64 digital signals per ms
Ethernet
1/10/100 MBit/s
USB
2.0
CompactFlash
®
CF and CF+ cards; type I and type II.
Warning:
Very slow PIO 0 cards can cause errors during data transmission.
As a result, a configuration may be incorrectly read. For this reason,
you may have to check the log file.
Cards with read errors:
Ultron 128 MB. In addition, these cards have no partition table.
Cards that have been tested to be error-free:
Kingston 1 GB
Fujifilm "Microdrive™" 4 GB
Profibus Module
Profibus data transfer
rates
187.5 kBit/s
500 kBit/s
1.5 MBit/s
3 MBit/s
6 MBit/s
12 MBit/s
Number of physical
Profibus channels
1 or 2 (switch-selectable)
Number of DP slaves
2 (distributable over one or two lines)
DP slave addresses
0 to 125
