19
Tech Support:
(
877) 591-2491
Here we have assigned Zone 1 to the family room, and
Zone 2 to the kitchen area; these are areas where, even
though you are listening to the same music (the same
source), you may still want to control lighting brightness
and speaker volume separately. For example persons
listening to music in the kitchen may want to turn the
music volume lower while those in the family room may
want the turn the music louder and dim the lights. With
two zones each group can have the music and lights the
way they want them without affecting the other group.
Two-Zone System:
Assign each LightSpeaker
®
to the
zone where it will be installed.
A)
Create a sketch of your anticipated zones (ie.
Figures 2A and 2B above).
B)
Decide what zone the speaker will go into.
C)
Place the LightSpeakers
®
in their respective zones.
Set the zone switch, on the back of each
LightSpeaker
®
, to the zone it will be placed.
This LightSpeaker
®
will be used in Zone 1 and is the right
side of a stereo pair.
