IAI SW-4000T-MCL, Руководство пользователя

Страница: 102 / 124

SW-4000T-MCL User Manual (2.0) Short ASCII Command List
- 102 -
Pulse Generator
Configure pulse generator settings.
Note: Descriptions of each command can also be found in " PulseGenerator " (Setting List).
Pulse Generator Name Access
Short
ASCII
Values
Default
Value
Example / Description
ClockPreScaler R/W PGDEV 1 ~ 4096 1
PGDEV=[Param.]<CR><LF>
PGDEV?<CR><LF>
Set the division value for the
prescaler (12 bit) using
PixelClock as the base clock.
PulseGeneratorLength
[PulseGenerator0]
R/W PGL0 1 ~ 1048575 1000000
PGL0=[Param.]<CR><LF>
PGL0?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator0.
PulseGeneratorLength
[PulseGenerator1]
R/W PGL1 1 ~ 1048575 1000000
PGL1=[Param.]<CR><LF>
PGL1?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator1.
PulseGeneratorLength
[PulseGenerator2]
R/W PGL2 1 ~ 1048575 1000000
PGL2=[Param.]<CR><LF>
PGL2?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator2.
PulseGeneratorLength
[PulseGenerator3]
R/W PGL3 1 ~ 1048575 1000000
PGL2=[Param.]<CR><LF>
PGL2?<CR><LF>
Set the maximum count-up
value as a clock count for
PulseGenerator3.
PulseGeneratorStartPoint
[PulseGenerator0]
R/W PGST0 0 ~ 1048575 0
PGST0=[Param.]<CR><LF>
PGST0?<CR><LF>
Set the start point of the High
interval as a clock count for
PulseGenerator0. When the
counter reaches this value, the
output will be 1.