IAI R-unit RSEL, Инструкция по эксплуатации, Страница: 504 / 844

Chapter 9 Special Functions
9.3 Preventive Maintenance Function
9-12
ME0392-4C
9.3.3 Maintenance Information
[For driver unit]
The following data should be integrated and recorded to the driver unit.
• Total moving count (The number of times the actuator has moved)
Name Unit Input range Default initial value setting
Total moving count time 0 to 999,999,999 0 (disabled setting)
• Total moving distance (The number of times the travel distance)
Name Unit Input range Default initial value setting
Total moving distance
m
km
0 to 999,999,999 0 (disabled setting)
If the set count or distance
(Note 1) is exceeded, an alarm (Note 2) and external signal (Note 3) can be
output. This enables checking the timing for lubrication and periodic inspection.
The recorded data should be able to be checked in a teaching tool.
PC Software Maintenance Information screen
TB-02 Maintenance Information
Note 1: Setting should be established in the following parameters or the maintenance
information screen in the teaching tool.
• Parameter No. 147 “Total travel count target value”
• Parameter No. 148 “Total travel distance target value”
Note 2: Outputs a message level alarm “205 travel count target value exceeded” or “206 travel
distance target value exceeded”.
For details, refer to [11.3 Error Table].
Note 3: Outputs a minor malfunction alarm (ALML).