IAI GO-2400M-PGE-1, Руководство пользователя

Страница: 92 / 108

GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0) Settings List
- 92 -
JAICustomControlBlemish
Configure settings for JAI white blemish correction.
Blemish
Control
Item
Setting
Range
Default Description
Blemish Enable
False
True
True Enable/disable blemish correction.
Blemish Detect - - Execute blemish detection.
Blemish Detect
Threshold
0 ~ 100 10 Set the blemish detection threshold.
Blemish Detect
Position Index
0 ~ 255 0 Select the index for the target blemish coordinates (Blemish Data Position X/Y).
Blemish
Detect
Position X
- 1 ~1935 -1
Display the X coordinate (horizontal pixel position) of the target blemish selected in [Blemish
Detect Position Index]. You can also manually enter the X coordinate of the blemish you
want to correct.
Blemish
Detect
Position Y
- 1 ~ 1215 -1
Display the Y coordinate (vertical pixel position) of the target blemish selected in [Blemish
Detect Position Index]. You can also manually enter the Y coordinate of the blemish you
want to correct.
BlemishNum - - Display the number of target blemishes.
JAICustomControlShading
Related Topic: ShadingCorrection
Configure shading correction settings.
Note: Settings that can only be configured when image acquisition on the camera is stopped.
Shading
Control Item
Setting Range Default Description
Shading Correction
Mode
Flat Shading
Color Shading (Color
models only)
Flat Shading Select the shading correction method.
Shading Mode
Off
User 1
User 2
User 3
Off
Set the area to which to save shading correction data. When this is
set to Off , shading correction data is not saved.
Perform Shading
Calibration
- - Execute shading correction.
Shading Detect Result - - Display the shading correction results.