GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)
Settings List
- 76 -
Settings List
This chapter lists the feature properties.
DeviceControl
Display/configure information related to the device.
Device Control Item
Setting Range
Default
Description
Device Vendor Name
-
“JAI Corporation”
Display the manufacturer name.
Device Model Name
-
-
Display the model name.
Device Manufacturer Info
-
"See the possibilities" Display the manufacturer information.
Device Version
-
-
Display the hardware version.
Device Firmware Version
-
-
Display the firmware version.
Device Serial Number
-
-
Display the device ID.
Device User ID
Any
-
Set the user ID for the camera.
Device Temperature
-
-
Display the internal temperature (°C) of the camera.
Device Reset
-
-
Reset the device.
ImageFormatControl
Configure image format settings.
Note:
Settings that can only be configured when image acquisition on the camera is stopped.
Image Format
Control Item
Setting Range
Default
Description
Sensor Digitization
Taps
10 Bit
12 Bit
10 Bit
Displays the digital tones output from the sensor.
Width Max
1936
1936
Display the maximum image width.
Height Max
1216
1216
Display the maximum image height.
Width
16(8)* ~ 1936(968)*
*When Binning = 2, the value
in "( )" is applicable.
1936
Set the image width.
Related Topic:
ROI (Region of Interest) Settings
Height
Mono
1 ~ 1216 (608)*
Color
2 ~ 1216
*When Binning = 2, the value
in "( )" is applicable.
1216
Set the image height.
