GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)
Main Functions
- 72 -
Counter and Timer Control Function
Related Setting Items:
JAICustomCounterAndTimerControl
Note:
This camera supports only the counter function.
The counter function counts up change points in the camera’s internal signals using the camera’s
internal counter and reads that information from the host side. This function is useful for verifying error
conditions via the count value using internal camera operations.
Counting is performed at frame trigger, frame start, exposure start, and exposure transfer end, and by
comparing these values, you can determine the internal camera state at which missed triggers will
occur.
Counter Occurrence Diagram
Note:
To reset the counter itself, execute Counter Reset or enter “1” in Counter Reset.
Internal Camera Blocks
