IAI AP-3200T-PMCL Скачать руководство пользователя

Страница: 47 / 76

—

AP-3200T-

PMCL

Pre-correction

Post-correction

Caution

• For FlatShading and ColorShading, the maximum amount of correction gain for all pixels

is limited to twice the amount of gain before correction. (The amount of gain cannot be

increased to more than twice the amount of gain from before correction.)

• If the area in the screen with the highest brightness level is 175 LSB or less (during 10-bit

video output), proper correction is not possible.

■

To use the shading correction function

Configure the settings as follows.

Item

Setting value

Description

ShadingCorrectionMode

FlatShading, ColorShading

Select the shading correction mode.

ShadingMode

User1, User2, User3, Off

Select the user area to which to save

the shading correction value.

Display a white chart under a uniform light, and execute [PerformShadingCalibration].

Note

After shading correction is executed, the shading correction value is automatically saved to the user

area selected in [ShadingMode].

Binning Function

The binning function allows you to combine the signal values of clusters of adjacent pixels to

create improved virtual pixels. Using the function results in images with lower pixel resolution

and higher sensitivity.

This camera performs vertical binning and horizontal binning via digital addition or averaging

processing.

ROI (Regional Scanning Function)

The ROI (region of interest) function allows you to output images by specifying the areas to

scan.

ROI Settings

Specify the area to scan by specifying width, height, and horizontal/vertical offset values

under [ImageFormatControl].

For details on how to configure the settings, see “Configuring the Output Format”.

You can increase the frame rate by specifying a lower height, as the number of lines scanned

decreases.

The setting ranges for the ROI function's readable area based on the Binning setting

(BinningHorizontal, BinningVertical) are as follows.

Содержание AP-3200T-PMCL













































































Результаты поиска

Содержание AP-3200T-PMCL

Отзывы:

Похожие инструкции для AP-3200T-PMCL

Бренды по названию

Популярные бренды

IAI AP-3200T-PMCL, Руководство пользователя

Результаты поиска

Содержание AP-3200T-PMCL

Отзывы:

Похожие инструкции для AP-3200T-PMCL

Бренды по названию

Популярные бренды