5
IMPORTANT SAFETY PRECAUTIONS
17.
Do not use this device near water
---for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement or near a swimming pool, and the like.
The apparatus should not be exposed to dripping or
splashing liquids and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Do not use immediately after moving from a low
temperature to high temperature environment, as this
causes condensation, which may result in fire, electric
shock, or other hazards.
18.
Clean only with dry cloth
---Unplug the device from the
power before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a soft cloth for cleaning.
19.
Ventilation
---Do not block any ventilation openings.
Install the screen in accordance with the manufacturer
instructions. Do not cover or block these vents and
openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. This
product is not designed for built-in installation; therefore
do not place the product in an enclosed space such as a
bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
It should have interspace around the product and the
wider it has the heat dissipation is better. Suggest
up>10cm, around>10cm and back >2.5cm.
20.
Heat sources
---Do not install near any heat sources such
as radiators, heat registers, stoves, or other device
(including amplifiers) that produce heat.
21.
Panel protection
---The display panel used in this product
is made of glass. Therefore, it can break when the product
is dropped or impacted upon by other objects. Be careful
not to be injured by broken glass pieces in case the display
panel breaks.
Do not use hard or sharp object to take place of special pen
when write in the screen.
Wipe the screen from one side to the other carefully till it
looks completely clean. Do not flailing in all directions.
22.
Pixel defect
---The display panel is a very high technology
product, giving you fine detailed pictures. Occasionally, a
few non-active pixels may appear on the screen as a fixed
point of blue, green or red. Please note that this does not
affect the performance of your product.
WARNING:
For continued safety, device with class I
construction shall be connected to a mains socket outlet with
a protective earthing connection.
About Location/Environment
Do not use in hot and cold rooms (locations)
When the unit is used in rooms (locations) with low
temperature, the picture may leave trails or appear slightly
delayed. This is not a malfunction. The unit will recover when
the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not
leave the unit in a location exposed to direct sunlight to near
a heater or in high humidity, as this may cause the cabinet to
deform and the screen to malfunction and affect the screen’s
performance.
Environment condition:
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80%
(no moisture condensation)
Storage temperature: -15°C – 45°C
Storage humidity: 10% – 80%
Atmospheric pressure: 86 kPa ~106 kPa
About After-Image
The extended use of fixed image program material can cause a
permanent after-image on the screen.
This background image is viewable on normal programs in the form
of a stationary fixed image. This type of irreversible screen
deterioration can be limited by observing the following steps:
A.
Reduce the brightness/contrast setting to a minimum viewing
level.
B.
Do not display the fixed image for extended periods of time.
C.
Turn the power off when the display is not in actual use.
Important Information Regarding Use of Video Games,
Computers, Captions or Other Fixed Image Displays.
Do not allow a still picture to be displayed for an
extended period of time, as this can cause a permanent
after-image to remain on the screen. Examples of still
pictures include logos, video games, computer images,
teletext and images displayed in 4:3 mode.
CAUTIONS:
The permanent after-image on the screen resulting from fixed
image use is not an operating defect and as such is not covered
by the warranty.
This product is not designed to display fixed images for extended
periods of time.
It is not advised to put the screen in portrait mode because this
will affect the warranty.
Cleaning and Maintenance
To clean this unit, wipe with a soft, dry cloth. Clean the cabinet
with a soft, lint-free cloth. If the cabinet is especially dirty, moisten
a soft, lint-free cloth in a weak detergent Solution, squeeze the
excess moisture from the cloth, then wipe the cabinet with the
cloth. Use a clean cloth to dry the cabinet.
Use eyeglass cleaner to remove stubborn dirt from the screen.
Never use alcohol, paint thinner or benzene to clean this device.
Carrying or Moving the screen
When you move the screen , hold the frame of the screen .
Be aware of the danger or harm which may caused by carrying or
moving the screen , as the bezel is very thin.
When transporting, do not subject the unit to shocks or vibration, or
excessive force.
Environmental Protection
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for
recycling advice.
