4.3. Annexxus Finder
Annexxus Finder locates all Annexxus 301-series devices on the network and displays important information about each
individual Annexxus device, including IP Address, Subnet Mask, Port number, Firmware version, and MAC Address.
Annexxus Finder application allows configuring the IP Address and the Subnet Mask for the detected Annexxus 301-series
devices as well as resetting the device's password to the factory default: "1234".
4.3.1. Installing Annexxus Finder
Each Annexxus-series encoder is accompanies by the Resource CD. Locate the CD that was shipped with your Annexxus
encoder and insert it into your system's optical drive.
On the CD, locate and open the Annexxus_Finder folder.
To install AnnexxusFinder application, follow the steps below:
1. Double-click the
Setup.exe
file
2. In the first setup window, click
Next
3. In the Select Installation Folder setup window, select installation drive and folder by clicking
Browse...
or keep the
default installation folder (recommended). Select
Everyone
radio button and click
Next
.
4. In Confirm Installation setup window, click
Next
to proceed with the installation
5. Wait while the Annexxus Finder software is installing onto the local system
6. WinPcap installation will be automatically launched. You must install WinPcap library for the proper functioning of
the Annexxus Finder application.
In the WinPcap 4.0.2 Installer window, click
Next
7. In the following WinPcap installer window, click
Next
8. In the WinPcap License Agreement window, read the WinPcap license terms (scroll to read the entire document).
Then click
I Agree
button.
90
Annexxus Finder
Chapter 4. Appendix
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at