2.10.2. Adding/Modifying/Deleting Operator User
Adding/Modifying Operator User
To add a new operator user or to modify existing operator user, do the following:
1. In the User Management setup tab, right-click on the desired Operator account in the left-hand pane and select
Modify
from the context menu
2. Enter the user name in
User Name
field. User Name may not exceed 16 characters.
3. Enter the password in
Password
and
Re-enter Password
fields. Password may only consist of numbers and may
not exceed 16 characters.
4. Configure user privileges. Following privileges can be assigned to the operator user(s).
Error Message shown to unauthorized
users when privilege is disabled.
Privilege Limitation
User Privilege
"Viewing video has failed due to network
communication error. There may be too
Check off to allow the operator to view live video
from the selected channel(s). Note that this set-
Live Video Viewing
(configured per chan-
nel)
many connections with this device at the
same time."
ting will affect the DVMS/NVR video viewing/re-
cording.
"Search and list file failed!"
Check off to allow the operator to search video
recorded onto the internal storage device.
Search Video/Au-
dio
(configured per
channel)
"Save settings failed!"
Check off to allow the operator to make changes
to Annexxus setup.
Save Settings
"The device is busy or network as problem,
search log exception!"
Check off to allow the operator to search logs
saved onto the internal storage device.
Search Logs
Check off to allow the operator to control con-
nected PTZ camera(s). Applies to Annexxus
301/304 only.
Control PTZ
"Two-way audio session has failed to start".
Check off to allow the operator to initiate and
to stop a two-way audio conversation.
Two-way Audio
"Formatting Failed!"
Check off to allow the operator to upgrade the
device firmware, format internal storage device
Upgrade, Format,
Reboot
(Annexxus 301C/301C2M only), or to reboot the
Annexxus device.
58
Adding/Modifying/Deleting Operator User
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at