System Setup > Camera Settings
Revision: 180906
Veo16i User Manual
Page | 41
PTZ Setup
<SYSTEM SETUP> - <CAMERA> - <PTZ SETUP>
Configure PTZ cameras connected to each channel. Set camera ID, protocol, baud rate and PTZ control
speed for each channel.
Note: Refer to user manual of the camera for information on camera address, protocol and baud rate
settings.
1.
For each connected PTZ camera, use the grid to set camera
ADDRESS (Camera ID
),
PROTOCOL
and
BAUD RATE
.
2.
Click
APPLY
to save new configurations
3.
When done, click
CLOSE
or press [
EXIT
] on the remote control.
Privacy Mask
<SYSTEM SETUP> - <CAMERA> - <PRIVACY MASK>
In the Privacy Mark tab, set up to 4 areas (per channel) that need to be blocked off with a rectangle on
Live View and from video recording because of privacy or other concerns.
To enable Privacy Mask for selected cameras,
1. In
ACTIVATION
column, set privacy mask to
ON
or
OFF
for selected cameras.
2. In
MASK COLOR
column, set the color of the masked area, which will be displayed on the
monitor.
3. Click
APPLY
to save new configurations.