manualshive.com logo in svg

i3 International Veo16i, Руководство пользователя, Страница: 12 / 96

Поделиться
Скачать
i3 International Veo16i Скачать руководство пользователя страница 12

Installation > Change Remote ID

 

Revision: 180906 

Veo16i User Manual 

Page | 11 

Change Remote ID 

The default remote control ID is 00. 

The remote control will be active only if the remote control ID matches with that specified on the DVR. 
To use a single remote with multiple DVRs, set use the ID button on the remote control to set the 
Remote ID. Then configure the Remote ID on all DVRs to the same number. 

To set the Remote Control ID on the DVR: 

1. From System Setup menu, go to <SYSTEM> - <CONTROL DEVICE> -<REMOTE CONTROLLER

ID>.

2. Set the number between 00 and 99. For more details, refer to 

Control Device

 section.

To set the Remote Control ID: 

1. Press the [ID] button on the remote control.
2. Use the number buttons and enter a two-digit ID. E.g. To set Remote ID to “1”, enter “01”.
3. Make sure the Remote Control works with the new ID.
4. To reset the ID to 00, press and hold the [ID] button.

Installation 

Before installation: Ground yourself. This will remove any static electrical charge 
your body might be carrying 

1. Plug the 

mouse

 into the USB port in the front or the back of the unit.

2. Plug the 

main monitor

 into the VGA or the HDMI port on the motherboard. To connect a DVI

monitor, use HDMI-DVI adapter (not included).

Note:

 For proper display, your main monitor must support 

1920 x1080 at 60Hz.

3. Connect Veo16i DVR to the 

network

. Use the RJ45 port on the back of the unit.

4. Connect all 

analog cameras

 to the BNC ports on the back of the unit. If using PTZ cameras,

connect RS485 communication cable to the corresponding ports on the back of the DVR.

5. Connect other 

peripheral devices

, if using, such as Spot Out monitor, RCA Audio

Inputs/Output, eSATA storage, Alarm IN/OUT devices, etc.

6. Connect the provided 

12V DC Power Adapter

 to the power port on the back of the DVR.

Secure the power cable with the power cable retainer clip (provided) then fasten retainer clip to
the opening to help prevent unintended disconnection of the power.

7. Connect the power cable to the 12V DC Power Adapter to the power port on the back of the

DVR. Connect the power cable to the 

Uninterruptible Power Supply (UPS)

, 1000VA min., to

maintain warranty.
Connect the UPS to the Power Source / power outlet

8. The system will power on automatically. If this does not happen, press the power button on the

front of Veo16i DVR. The system will then power up.

Содержание Veo16i

































































































Отзывы:

Нет отзывов