63
To Configure a Dynamic ARP Inspection Table in the web interface:
•
Click Configuration / Security / Network / ARP Inspection / Dynamic Table
•
Click Add New Entry.
•
Specify the Port, VLAN ID, IP Address, and MAC address in the entry.
•
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
Dynamic ARP Inspection Table Configuration Parameters:
Items
Description
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
User IP address of the entry.
Translate to Static
Select the checkbox to translate the entry to a static entry.
Authentication, Authorization, and Accounting (AAA)
This section describes how to use an AAA (Authentication, Authorization, and Accounting) server to provide access control
to your network. The AAA server can be a or RADIUS server to create and manage objects that contain settings
for using AAA servers.
RADIUS
To configure a common AAA, Radius in the web interface:
•
Click Configuration / Security / AAA / Radius
•
Enter the desired Global Configuration parameters
•
Click Add New Server to Create a new server configuration
•
Enter the HostName, Auth Port, Acct Port, Timeout, Retransmit, and Key
•
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
Содержание S81
Страница 113: ...112 NOTE Click the Port index to set the QoS Egress Port Schedulers...
Страница 117: ...116...
