background image

CAMERA PARTS AND DEFINITIONS, 

DISASSEMBLING THE CAMERA

Quick Start Guide

3MP/6MP Infrared Outdoor IP 360-degree Fisheye Camera

Ax68R/78R

SAFETY 

When installing your Ax68/78 camera be sure to avoid:

•  excessive heat, such as direct sunlight or heating appliances

•  contaminants such as dust and smoke

•  strong magnetic fields

•  sources of powerful electromagnetic radiation such as radios or TV transmitters

•  moisture and humidity

•  areas with mechanical vibrations

•  fluorescent lamps or objects that reflect light

•  unstable light sources  as this may cause flickering

•  temperatures below -30° Celsius or -22° Fahrenheit and above 60° Celsius or 140° 

Fahrenheit.

 

POWER SUPPLY

Ax68/78 Power consumption requirement: DC 12V / PoE (IEEE 802.3af). 

Ensure the supplied voltage meets the power consumption requirements of this camera 

before powering the camera on. Incorrect voltage may cause irreparable damage to the 

video camera and will effectively void the camera warranty.

PoE power is supported.

CLEANING

•  For maximum optical clarity, the camera dome or lens must remain clean. Use a soft, 

dry cloth to remove finger prints or dust from the dome cover.

•   Use a blower to remove dust from the lens.

•  Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a 

small quantity of neutral detergent, then wipe dry.

•   Do not use volatile solvents such as alcohol, benzene, or thinners, as they may 

damage the surface finishes.

SERVICING

To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the 

camera. Refer servicing to qualified personnel only.

PACKAGE CONTENTS

Ensure that the items received match those listed on the order form and the packing slip. 

In addition to this manual and a fully assembled camera, the dome camera packing box 

includes:

A.  Waterproof RJ45 connector (x1 package with 4 pcs). 

Use to protect RJ45 cable connector from the elements.

B.  Waterproof tape. Use to protect DC12V power connector from moisture.

C.  Plastic Anchor x4 

D.  Round Head Screw (Tapping Type) x4

E.  Surface Mount template x1

i3-TRNG-CAMS-

Ax68/78-QSG.

indd

Rev. 

180129

52 mm

168 mm

52 mm

168 mm

3
4
5

Ax68/78 Camera Side view, with 

camera cover attached

Camera module with camera cover removed. 

Use a Phillips screwdriver to remove the SD card panel cover 

(2)

to expose microSD card slot 

(3)

 and the RESET pin hole 

(4)

Rubber gasket is provided for an airtight seal and moisture protection 

(5

).

Camera module with camera cover removed.

6.  Built-in speaker

7.  MicroSD card slot 

Insert a micro SDHC card 

for backup/emergency 

recording and/or storage.  

RESET pin hole 

Use a sharp object to 

Press the Reset button, the 

camera will be rebooted.

8.  Light sensor for day/night 

switching

9.  IR LEDs x3

10.  Camera cover lock screw 

hole

11.  Mounting screw hole/

slot x3

12.  Camera cover clips x3

13.  Built-in microphone

14.  DC12V Power connector. 

Use the included waterproof 

tape to protect the 

connector from moisture.

15.  RJ45 Network connector 

(PoE supported)

Ax68/78 Camera, Top view, with camera cover 

attached. Lift the safety lock screw cover to reveal 

the safety lock screw 

(1)

. Use a Phillips screwdriver to 

loosen the lock screw, then grip the camera cover and flex 

on one side, towards the center. Lift UP to remove.

1

1

1

TOP

Drill Template

Hole A : for cables routed through the ceiling

Screw hole 1 : for Mounting Base

Scan this QR code or visit 

ftp.i3international.com

 to view and 

download the full User Manual for this camera. Also available for 

download is the 

AnnexxusConfigurationTool 

or ACT program 

used to locate and configure your cameras with your SRX-Pro soft-

ware. This program is already installed in SRX-Pro v3.3.3.69 and 

higher. Please contact our Technical Support team if you have any 

questions or concerns regarding camera installation or you require 

software services or support. Technical support can be reached by 

email at: 

[email protected]

 or by phone toll free 

1.877.877.7241.

QR Code to Complete 

User Manual / ACT

1

2

6

7

8

9

10
11
12

13

14

15

A

C

D

E

Waterproof tape

e   Waterproof tape

pe    Waterproof ta

 

f tape    Waterproo

oof  tape        Waterpr      

proof tape    Water

B

Отзывы: