background image

Connect the PoE or DC12V power connector.
PoE (IEEE 802.3af): Connect the RJ-45 
connector to a PoE compatible network device 
that supplied power through the Ethernet cable.
DC12V: Connect the DC12V power connector to 
a DC12V power source.

SAFETY

When installing your Ax44/66 camera be sure to avoid:
•  excessive heat, such as direct sunlight or heating appliances
•  contaminants such as dust and smoke
•  strong magnetic fields
•  sources of powerful electromagnetic radiation such as radios or TV transmitters
•  moisture and humidity
•  areas with mechanical vibrations
•  fluorescent lamps or objects that reflect light
•  unstable light sources  as this may cause flickering
•  temperatures below -10° Celsius or 14° Fahrenheit and above 50° Celsius or 122° 

Fahrenheit for Ax46-series cameras, -25° Celsius or -13° Fahrenheit and above 60° 
Celsius or 140° Fahrenheit for Ax66-series cameras

• 

For more details on installation and operation, please refer to the CD 
provided.

POWER SUPPLY

Ensure the supplied voltage meets the power consumption requirements of this camera 
before powering the camera on. Incorrect voltage may cause irreparable damage to the 
video camera and will effectively void the camera warranty. PoE power is supported by 

this camera series.To mount the camera, do the following:

CLEANING

•  For maximum optical clarity, the camera dome or lens must remain clean. Use a soft, 

dry cloth to remove finger prints or dust from the dome cover.

•   Use a blower to remove dust from the lens.
•  Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a 

small quantity of neutral detergent, then wipe dry.

•   Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam-

age the surface finishes.

SERVICING

To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the 
camera. Refer servicing to qualified personnel only.

PACKAGE CONTENTS

1.  User Manual CD x1

2.  Guide Pattern sticker x1

3.  Torx key x1 

4.  Plastic Anchor x3

5.  Round Head Screw (Tapping Type) x3

CAMERA PARTS AND DEFINITIONS

Quick Start Guide

Network IR Dome Camera 

Ax46/66-series

i3-TRNG-CAMS-

Ax46/66-series-QuickGuide

.indd

Rev. 

130725

WARNING! 

DO NOT connect both PoE and 

DC12V power connectors at the same time. 
For DC power supply use, make sure the 
polarity is correct to avoid malfunction and / 
or camera damage.

1

User Guide

IP Finder

2

5

4

3

Ceiling Mounting

Hole

Hole

Hole

Hole

Mounting base

Horizontal stand

Vertical stand

Lower dome

Infrared lamp plate

Lens

Black liner

Safety rope

IN

DC12V

Cables

Power line
Network cable

Ø111

82.4

Ø79.1

Ø100.4

Unit: mm

Отзывы: