9
5. Turn on the power switch, the steam mop will be in standby
mode and is ready to use.
Note: Upon initial use, please allow the water to flow through
the system for approximately 30 seconds to prime the unit.
6. To select the steam mode, continue to press the steam control
button for Low steam mode (Light Cleaning), Medium steam
(regular cleaning), or High steam (Deep cleaning heavy traffic
areas). Wait 30 seconds for it to heat up and emitting steam.
The indicator light will glow in Low, Med or Hi modes.
7. Begin cleaning by slowing passing the unit on floor surface.
8. The steam will be cut off when the steam mop body is in the
upright position. To continue to clean, use the mop handle to
direct the mop head across the floor.
9. After you finish cleaning, turn off the steam mop and unplug
the power plug from power supply.
Ins
tructions F
or Use
upright
position
