I-Tech MAG700, Руководство пользователя

Страница: 16 / 32

IACER Srl 16 MNPG69-09
*Autoscan program allows to adjust the desired therapy time then it
will start automatically a frequency cycle from 10 Hz to 100 Hz with a time
therapy of 5 minutes for each frequency.
It’s an ideal program for the
regeneration of both hard tissues (bones) and soft tissues (tendons,
ligaments) in the same treatment.
Therapy duration values are recommended by IACER however the user can
adjust the time as he prefers. Also, for each seating cycle (column
Treatment
cycles of the table List of programs above) the manufacturer IACER
recommends at least one treatment/session per day of the ongoing seating
cycle.
MAG700
uses therapy time values, working frequency values and field
intensity values coming from scientific and medical literature, as result of
well-known experimentations and clinical evaluations (Barker - Lunt 1983,
Bassett
– Pawluk – Pilla 1974, Bassett - Valdes – Hernandez 1982).
Program selection
Here are the instructions to follow for choosing the appropriate program
according to the pathology:
1. Within the menu, scroll through the list of programs by using the
keys
and , then select the desired program and press OK.
2. The display will show the basic therapy time setting (from the
figure, 2 hours) and the magnetic field intensity (40G) of the
selected program. These are average values suggested by IACER to
start the treatment immediately and effectively.