8
1
Introduction
The i-sense® is an easy and safe device to use. This manual helps you get started and
explains the operation and maintenance procedure.
The battery should be fully charged before use. You can do this by plugging the i-sense in to
a wall socket or by charging the i-power 8.7 battery separately in a battery charger (not
included). Please refer to your i-partner for more information on chargers.
This manual is intended for those who work with the i-sense and perform daily maintenance.
The manual must be read in full before the first actions. This manual describes the correct
method of use, safety measures, maintenance and transport.
i-team continuously improves all it’s products based on user experience and feedback. Any
deviations between the texts and/or images from the manual and your product can therefore
arise from a difference in model or from possible changes due to continuous development
and innovation.
1.1
Intended use of the product
The i-sense is specially developed to monitor the quality of air, in civil and industrial
environments. It is intended for use indoors and in a dry environment only. It is suitable for
commercial use. For example: in hotels, schools, hospitals, factories, shops and offices.
1.2
Non-intended use of the product
WARNING
Non-intended use can have consequences for the safety of operators and
bystanders and will void the warranty on the product.
The i-sense is not intended to modify your air quality, it only provides relevant data on the
quality of air.
1.3
Lifespan
For a longer lifespan of the i-sense, clean it and check it for damage after each use.
1.4
Modifications
It is not permitted to make modifications to the design of the i-sense without consultation and
permission from the manufacturer. This affects the warranty, see section 1.6.
